Final Exam CCNA 200-301

1.  

What Northbound API will be used between Application and controller?

2.  

Which one of below Wireless LAN standards is the oldest one:

3.  

What is the format of IPV6?

4.  

Which type of network protection protocol is this one?

5.  

Which ones of below list are valid Wireless LAN standards?

6.  

What is the highlighted zone called?

7.  

How does TCP differ from UDP at Layer4?

8.  

You want to apply an access list of 198 to an interface to filter traffic into the interface. Which command will achieve this?

9.  

Below diagram shows which model?

10.  

Which of the following configuration management tool uses an agentless architecture?

11.  

In NAT, the range of addresses for private networks from 10.0.0.0 to 10.255.255.255 makes a total of

12.  

It has been decided that PC1 should be denied access to Server1 of Network Walks. Which of the following commands are required to prevent only PC1 from accessing Server1 while allowing all other traffic to flow normally? (choose two)

13.  

What is the maximum length of an original Ethernet-II frame?

14.  

Which Python code is used to configure Hostname on a Cisco Router in Python 3?

15.  

Which two technologies are helpful to mitigate the issue of IPv4 addresses starvation? (choose two)

16.  

Which code will result in below output?

17.  

If apple = [iphone , ipad , mac] and companies = [apple , google , 9], which of the following will result from running print(companies) ?

18.  

Which protocol is an open standard protocol framework that is commonly used in VPNs, to provide secure end-to-end communications?

19.  

As a network administrator, you need to block traffic from the host network to the HR web application and allow all traffic to get to the intranet web server. Which type of access control list would you use?

20.  

Which ones of below are valid type of DNS queries?

21.  

A static route with 0.0.0.0/0 as the destination IP address (a route that matches all packets) is called:

22.  

Which VLAN Tagging method is Cisco propreitary?

23.  

Which Python code is used to capture username from a Cisco Router through a prompt in Python 3?

24.  

An OSPF Router connecting different Areas is called:

25.  

Which one is the second step in STP operation?

26.  

Which class does 192.168.0.23 belong to?

27.  

Which type of Network Architecture is this?

28.  

Which Logical Port is used by OSPF?

29.  

What is the AD (Admin Distance) of directly Connected Routes?

30.  

What the equivalent of 224 in binary?

31.  

In which format REST APIs typically encode data?

32.  

What is the size of IPv6 Address?

33.  

Which type of OSPF Router is this?

34.  

Which statement is used to display text strings in Python?

35.  

Recipes is the component of which configuration management tool?

36.  

Which type of STP port is this? (the Yellow highlighted port)

37.  

Which type of address is not used in IPv6?

38.  

Which of the following layers is present in OSI model but it is not found in TCP/IP model?

39.  

Which statement is correct about traditional firewall?

40.  

Which ones are correct STP Port states?

41.  

Which answer best describes the meaning of the term configuration drift?

42.  

Which Cisco command is used to view the VTP statistics information?

43.  

What is the length of VLAN Tag?

44.  

Which command produced the following output?

R1#
10 permit 192.168.1.56 0.0.0.7
20 permit 192.168.1.64 0.0.0.63 (4 matches)
30 deny any (8 matches)

45.  

What the equivalent of 10010110 in decimal?

46.  

What is the range of Normal VLANs?

47.  

Which option shows valid AP Modes (Access Point) standards:

48.  

Which Topology is found in Two-Tier Design?

49.  

Which of the following is a VLAN tagging method for trunk links?

50.  

Which of the following are advantages of using multimode fiber for an Ethernet link instead of UTP or single-mode fiber?